Zeagle N2ition - Dive Plan Mode Description

12
･The gray square shows a blinking part.
(1)Description of Functions
• Depth rank and NDL (non-decompression limit): Use this function to set the planned dive depth and
corresponding depth rank. There are 14 depth ranks, as shown below. The NDL corresponding to the
current PGT graph is displayed. The displayed NDL is for when MIX1 is used. The maximum
displayable NDL is 200 minutes.
• Battery indicator Icon: This Icon the current battery voltage.
• PGT (Pressure Gas in Tissue) graph: This indicates the level of Nitrogen with nine level indicators.
• OLI (Oxygen Limited Indicator) graph: This indicates the level of Oxygen limit with eight level
indicators.
• Fraction of oxygen: This displays only MIX1 the current setting.
• Sea/Fresh Icon: This indicates the water setting (sea water/fresh water).
• Altitude rank：The computer automatically measures and calculates the current location's altitude and
displays the corresponding altitude rank.
• Mode display: This shows Dive plan mode.
• Nitrox Icon: This Icon is ON when NITROX has been set for MIX1 or MIX2.It blinks if the MIX1 and
MIX2 setting is the default setting.
• Don’t Fly Icon: While computer calculates desaturation time,this icon turned on at Time Mode.When
the computer has finished calculating desaturation time and Time Mode is over 12 hours,this Icon is
turned off.
• Desaturation time: This indicates the time remaining of nitrogen until the body’s internal nitrogen is
desaturated. The time is counted down to 0:00, it turns off after 1 minute.
• Surface time: This is interval time after dive. Surface time is counted starting from when the depth
9 m (30 ft)
12 m (40
ft)
15 m (50 ft)
18 m (60
ft)
21 m (70
ft)
24 m (80
ft)
27 m (90
ft)
30 m
(100 ft)
33 m (110
ft)
36 m (120
ft)
39 m (130
ft)
42 m (140
ft)
45 m (150
ft)
48 m (160
ft)
Mode
Depth rank
PGT graph
OLI graph
Sea/Fresh Icon
Surface time
Fraction of oxygen
NITROX Icon
Altitude rank
Don’t Fly Icon
NDL(non-decompression limit time)