33
1-6-2. Battery
・When the battery mark is illuminated or blinking, record the data in your log and promptly change the
battery.
・A low battery left for a long period of time could lead to leakage, so change promptly.
・Have the battery changed by manufacturer, which has technicians trained to do this.
・When changing the battery, be careful of scratches on the back cover’s O-ring and make sure that no
foreign matter sticks to it. If you discover scratches or other problems with the O-ring, replace the
O-ring with a new one.
1-6-3. Diving
・Always check the battery’s power when you go diving. If the battery mark is illuminated or flashing, it
will not change to Dive mode.
・Before you dive, always check the FO
2
and FHe in dive set mode. You will not be able to set the FO
2
and FHe when you are in the water.
・You should dive so that you have plenty of margins to stay on no-decompression diving. Always make
a safety stop at three to six meters if you dive to 15 meters or deeper. We also recommend that if the
computer tells you to make a decompression stop, you should stop for longer then the time directed.
In this case, you should check the air’s residual pressure.
・This product does not manage your supply of air. You should therefore be aware of your own air
supply.
・You should use backup instruments (such as another dive computer, a depth meter, diver’s watch, etc.)
in addition to this product.
・After your dive you should calculate decompression based on the altitude rank. Sudden changes in
altitude rank are very dangerous. You must therefore not move anyplace that would cause significant
changes in altitude rank after your dive.
・The N2ition dive computer has a lockout function that will not let it work in a dive for 48 hours if you
dive in a dangerous way. This lockout function can be forcibly released for factory in process
inspections. Even if the lockout is accidentally released, you should still refrain from diving for 48
hours.
1-6-4. User care and maintenance
・After diving, clean your dive computer in pure water. Do not, however, leave the unit in the water for
long periods, since this can shorten battery life. Wipe away any soiling or mineral deposits from the
water with a soft cloth.
・Solvents such as alcohol and gasoline, sprays such as cosmetics cleaning liquids, adhesive and paints
will stick to the computer, while alkali, aromatic hydrocarbons, hydrocarbon halide etc can change its
quality. Use proper care, because this can cause the dive computer to lose its waterproofing.
・Keep the dive computer in a cool, dry place. Dry it well after diving and do not keep it with wet items.
To Next Page
Loading...