Zeagle N2ition - Units, Safety, and Maintenance; Units of Measurement and Cautions; Product Handling and Safety Cautions

32
1-5.Units of Measurement
・You can change the units of water depth and temperature by the switches of this product
Changing water depth units from meter to feet.
The display will show 0-328ft(0-99.9m).
Changing temperature units from Centigrade to fahrenheit.
The display will show 23～104°F(-5～+40).
These numerals are based on meter and  and calculated to the new units.
・Operating method: In dive set mode, hold down switches A + C for 6 or more seconds. When you do
this, the buzzer will sound to tell you that the unit system has changed.
<Caution>
The manufacturer alone should change the unit system. In Japanese legal issues, you should not
tell the user how to change units.
1-6. Caution points for User
1-6-1. Caution related product handling
・Before using this product, read the manual and be sure you understand it thoroughly.
・Do not store or leave this product in a hot or moist place. Doing so could damage its performance.
The pressure sensor is particularly susceptible and could give incorrect displays of altitude rank and
water depth. If the computer becomes overheated, put it in water to cool it down.
・Leaving the computer in a hot place could cause the liquid crystal display to turn black, but it will
return to normal when it cools down.
This situation should still be avoided since it can shorten the ilfe of the panel.
・You should be aware that the computer may give an incorrect altitude rank because of weather-related
changes in air pressure.
・Do not subject the computer to pressure chamber tests such as with air or gas. This could affect sensor
precision.
・Never take apart the product. This will void the guarantee.