Zeagle N2ition - Dive Logging and Profile Data; Dive Log Mode Data and Functions

13
shown in Dive mode reaches 1.5 meters (5 feet) or less. If the depth changes back to 1.5 meters (5
feet) or more in less than 10 minutes, the previous dive mode is continued. Surface time is continued
for 48 hours. After that, surface time is turned off after 1 minute.
(2)Operation of switches
• A: Press this switch to decrease one to the depth rank.
• B: Press this switch to move to dive log mode.
• C: Press this switch to add one to the depth rank.
• D: When water is detected, the mode moves to dive mode.
• Auto return: The display automatically returns to time mode when no switches are used for 2-3
minutes.
• B: Press and hold this switch for 1-2 seconds to move to time mode.
1-3-4.Dive Log Mode <Display 1>
<Dislpay 2>
The gray square shows a blinking part.
Dive date
Dive entry time
NITROX Icon
Altitude rank
Dive time
Fraction of oxygen
PGT graph
OLI graph
Log number
Dive number
Dive exit time
Maximum depth
User Safety Factor
Average depth
water
temperature
Ascent rate indicator