Zebra CS4070 Quick Reference Guide

Quick Reference Guide 13
Scanning
To scan a bar code:
1. Aim the scanner at the bar code.
2. Press the scan (+) button.
3. Ensure the aiming dot is centered on the
bar code.
The scanner beeps and the LED turns green to
indicate a successful decode. See User
Indications for beeper and LED definitions.
Note The scanner cannot scan bar codes
when it is connected to the host via
the USB cable.
Note Hold down the + button for 10
seconds to toggle the beeper
functionality on and off.

Zebra CS4070 Specifications

General

Brand	Zebra
Model	CS4070
Category	Barcode Reader
Language	English