To Next Page

To Previous Page

Quick Reference Guide 17

Troubleshooting

Problem Possible Solutions

Imager comes on, but

scanner does not

decode the bar code.

Ensure the scanner is

programmed to read the

type of bar code being

scanned.

Ensure the symbol is not

defaced. Scan other bar

codes of the same bar code

type.

Move scanner closer to or

further from bar code.

Scanner LED turns

solid red for a few

seconds.

Charge the battery. See

Charging on page 4

Scanner does not fully

charge.

Ensure the scanner is

connected to a powered

USB hub (5V, 500mA max).

Bluetooth LED turns

off.

Scanner is out of range;

move closer to the host and

press any button to re-pair

with the host.

Scanner emits long

beeps for 5 seconds

when scanning a bar

code.

Memory is full; download

bar code data to the host

and clear the memory.

Zebra CS4070 Quick Reference Guide

Other manuals for Zebra CS4070