Zebra CS4070 - Deleting Bar Codes; User Indications

14 CS4070 Scanner
Deleting Bar Codes
In batch mode, to delete a bar code aim the
scanner at the bar code and press the delete
( - ) button.
User Indications
Note Bar codes cannot be deleted in Bluetooth
mode.
Function
User
Action
LED Beeper
Scan item bar
code
Press scan
(+) button
Flashing green
-> solid green
Short high
tone
Battery status:
Full charge
(12 hours in a
busy
environment)
Press
battery
charge
button
4 green N/A
Battery status:
approximately
3/4 charge
3 green N/A
Battery status:
approximately
1/2 charge
2 green N/A
Battery status:
approximately
1/4 charge
1 green N/A
Delete bar
code
Hold
delete (-)
button
Flashing
amber -> solid
amber
Short
medium
tone
Delete - item
doesn't exist
Flashing
amber -> solid
red
Long short
short
Clear All
(with Delete
and Clear All
enabled)
Hold
delete (-)
button (if
enabled) 3
seconds
past scan
time
Flashing
amber -> solid
amber
2 long
medium
tones