Getting Started 1 - 7
Figure 1-7 Insert micro SIM Card
6. Push the micro SIM card in and ensure that it locks into place.
7. Replace the battery.
On the 10” version, ensure that the two battery latches engage.
Figure 1-8 Insert Battery
8. Align the tabs on the underside of the cover with the slot around the battery well. Make sure that the notch on
the battery cover is at the bottom left cover of the ET5X.
CAUTION
Be aware of the orientation of the battery cover. Failure to replace the battery cover properly may damage the
battery cover.
To Next Page
Loading...
