Zebra ET5X - Charging the Power Pack; Using Cradle; Using USB Power Adapter

5 - 20 ET5X User Guide
Figure 5-24 Install Power Pack
Charging the Power Pack
Charge the Power Pack using:
• a cradle
• USB power adapter
• 4-Slot Charger.
Using Cradle
With the Power Pack installed in an Expansion Back, place the ET5X into a cradle. The Power Pack charges in
less than 3.5 hours.
Using USB Power Adapter
Charge the Power Pack using a suitable power source that supplies 5 VDC @ 2A. The Power Pack charges in less
than five hours,
Figure 5-25 Charging Using Suitable Power Source
Sample Power
Source
USB Power Input
Port