Zebra GK888t User Manual

Introduction
What’s in the Box?
8
P1030829-001 GK888t™ User Guide 12/23/2010
Closing the printer
1. Hold the top cover and press the “kick-stand’ cover lock to release.
Lower the top cover. The ribbon cariage automatically folds up into place.
2. Press down until the cover snaps closed.

Zebra GK888t Specifications

General

Print Method	Thermal Transfer and Direct Thermal
Resolution	203 dpi (8 dots/mm)
Maximum Print Width	4.09 inches (104 mm)
Memory	8 MB Flash
Connectivity	USB, Serial, Parallel
Media Sensors	Reflective and transmissive
Media Handling	Roll-to-roll, fanfold, tag stock
Media Types	tag stock
Ribbon Ratio	1:1
Programming Languages	EPL2, ZPL
Power Requirements	2.5A
Storage Temperature	-40° F to 140° F/-40° C to 60° C
Humidity	20 to 85% non-condensing