41
Printing on Fan-Fold Media
12/23/10 GK888t™ User Guide P1030829-001
3. With a sample of your media, adjust the guides to the width of the media.The guides
should just touch, but not restrict, the edges of the media.
4. Run the media between the media guide and roll holders.
5. Close the top cover.
After printing or feeding several labels: If the media does not track down the center (moves
from side to side) or the sides of the media (liner, tag, paper, etc.) are frayed or damaged when
exiting the printer, then the media guides or roll holders may need further adjustment.
To Next Page
Loading...