Zebra MC3300X Series User Manual

MC3300x Mobile Computer Quick Start Guide
4
MC3300x-G Features
Front View
Figure 1 MC3300x-G Front View
NOTE The MC3300x-G does not ship with a pre-installed hand strap. However, one can be purchased separately as
a standalone accessory (SG-MC33-HDSTPG-01) if required.
Table 1 MC3300x-G Features - Front View
Number Item Function
1 Display Displays all information needed to operate the MC3300x-G.
2 Charge
/Application
Notification LED
or Scan/Decode
Status
Indicates the battery charge state while charging, an application
notification was received, or the scan/decode status.
3 Trigger Initiates data capture when a scan application is enabled.
4 Battery Release
Latch
Release the battery from the device.
5 Microphone Use for communications in Handset mode.
1
2
8
7
6
3
5
4
MN-003567-01EN_mc3300x-qsg-en.fm Page 4 Monday, June 22, 2020 8:37 PM

Zebra MC3300X Series Specifications

General

Operating Temperature	-4° F to 122° F/-20° C to 50° C
Storage Temperature	-40° F to 158° F/-40° C to 70° C
Processor	Qualcomm Snapdragon 660 octa-core, 2.2 GHz
Operating System	Android 10
Memory	3GB RAM, 32GB Flash
Connectivity	Bluetooth 5.0, NFC
Camera	13 MP rear camera (optional)
Drop Specification	Multiple 6 ft./1.8 m drops to concrete across operating temperature range
Sealing	IP64
Scanner	SE4770
Keypad Options	Numeric Keypad, Alpha-Numeric Keypad