Zebra MC3300X Series User Manual

MC3300x Mobile Computer Quick Start Guide
12
Setup
To start using the MC3300x for the first time:
• Install a microSD card (optional)
• Install the battery
• Charge the MC3300x
• Power on the MC3300x.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the
documentation provided with the card for more information, and follow the manufacturer’s recommendations for use.
1. Using a coin or finger, remove the microSD card cover.
Figure 8 Remove microSD Card Cover
2. Slide the microSD card holder to the Open position.
Figure 9 Unlock microSD Card Holder
3. Lift the microSD card holder.
Figure 10 Lift microSD Card Holder
CAUTION Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that
the operator is properly grounded.
MN-003567-01EN_mc3300x-qsg-en.fm Page 12 Monday, June 22, 2020 8:37 PM

Zebra MC3300X Series Specifications

General

Brand	Zebra
Model	MC3300X Series
Category	PDA
Language	English