Zebra S4M User Manual

147
Index
6/15/09 S4M User Guide 13290L-004 Rev. A
S
sales, 11
saving changes to parameters, 64
scratch test
media type, 34
ribbon coated side, 35
self tests, 114
CANCEL, 115
communications diagnostics, 121
FEED, 117
FEED and PAUSE, 120
PAUSE, 116
Power-On Self Test (POST), 114
sensors
calibrate, 85
cleaning, 93
interpreting sensor profile, 122
media sensor profile, 84
reflective, 59
select sensor type, 74
transmissive sensor location, 59
serial port
characteristics of serial connection, 27
connection and configuration, 28
setting passwords, 66
setup
checklist, 24
unpack the printer, 25
Setup mode
defined, 18
entering and leaving, 64
shipping
report damage, 25
reshipping the printer, 25
spacing requirements, 26
specifications
agency approvals and markings, 127
general, 126
media, 129
power cord, 31
printing, 128
ribbon, 130
specify media type, 74
speed adjustments, 75
storing the printer, 25
surface for the printer, 26
T
tag stock
described, 32
specifying, 74
Tear-Off mode
adjust tear-off position, 73
loading media, 42
media path, 38
print mode use described, 38
selecting label removal method, 74
technical support, 11
temperature requirements, 26
thermal transfer mode
media scratch test, 34
setting through control panel, 83
THERMISTOR FAULT message
cycling with other messages, 102
displayed alone, 102
top of label
adjust label top, 73
printer cannot detect, 112
transmissive sensor
location, 59
selecting, 74
troubleshooting
checklist, 100
communications problems, 110
diagnostic tests, 114
LCD error messages, 101
print quality problems, 106
types of media
black mark media, 32
continuous roll media, 33
fanfold media, 33
non-continuous roll media, 32
perforated media, 32
tag stock, 32
web media, 32
U
unpack the printer, 25
USB port
characteristics of USB connection, 27
connection and configuration, 28

Zebra S4M Specifications

General

Flash memory	4 MB
Internal memory	8 MB
Dimensions (WxDxH)	272 x 477 x 295 mm
Media types supported	continuous, die-cut, tag, black mark
Media thickness	0.076 - 0.15 mm
RS-232 ports	1
Standard interfaces	USB 2.0
Storage temperature (T-T)	5 - 40 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Weight	12400 g