Zebra S4M User Manual

Index
146
13290L-004 Rev. A S4M User Guide 6/15/09
P
parallel port
characteristics of parallel connection, 27
connection and configuration, 28
setting parallel communications, 78
parity, 79
password
defaults, 66
define via ZPL, 132
level 1 and 2 parameters, 72
level 3 parameters, 77
PAUSE button
FEED and PAUSE self test, 120
function, 19
PAUSE self test, 116
PAUSE light, 20
Pause mode, 18
Peel-Off mode
cleaning peel-off assembly, 94
loading media, 45
media path, 39
print mode use described, 38
selecting label removal method, 74
perforated media
described, 32
position label sensor, 59
power
connect to power source, 30
power cord specifications, 31
site selection, 26
POWER light, 20
Power-On Self Test (POST), 114
print configuration label
CANCEL self test, 115
from control panel, 68
print darkness adjustment, 72
print modes
described, 38
media paths, 38
specify label removal method, 74
print position adjustment, 73
print quality
troubleshooting, 106
print rate, 75
print server
characteristics of internal wired connection, 27
characteristics of wireless connection, 27
viewing network settings, 68
print speed adjustment, 75
print width adjustment, 75
printer components, 21
printer diagnostics, 114
printer interior, 21
printer language modes, 22
printer modes, 18
printer options
described, 38
media paths, 38
printer passwords, 66
printer resolution for APL-I, 76
printhead
cleaning, 90
faulty thermistor, 102
pressure adjustment, 61
printing specifications, 128
product markings, 127
R
Real-Time Clock (RTC)
set date, 81
set time, 82
recycling printer parts, 88
reflective sensor
adjustments, 59
selecting, 74
registration problems, 109
relative humidity requirements, 26
removal method for labels, 74
remove used ribbon, 57
replacement parts, 88
report shipping damage, 25
reset factory defaults, 82
reset network parameters, 82
ribbon
adhesive test, 35
determining coated side, 34
loading, 53
ordering, 11
removing, 57
scratch test, 35
setting printer for use, 83
specifications, 130
when to use, 34
RIBBON IN message, 102
ribbon sensor
calibration, 85
ribbon sensor calibration, 85
roll media
described, 32
routine cleaning schedule, 89

Zebra S4M Specifications

General

Flash memory	4 MB
Internal memory	8 MB
Dimensions (WxDxH)	272 x 477 x 295 mm
Media types supported	continuous, die-cut, tag, black mark
Media thickness	0.076 - 0.15 mm
RS-232 ports	1
Standard interfaces	USB 2.0
Storage temperature (T-T)	5 - 40 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Weight	12400 g