Zebra Symbol DS7708 - Decoding and Transmission Errors

Quick Reference Guide 17
The red LED
illumination turns on
dim and does not
get brighter (the
scanner does not
change to active
decoding mode)
when a bar code is
presented in the
field of view.
Bar code is not
within the scanner's
detection range.
Move the bar code to the region
within the scanner’s detection
range.
Bar code is
decoded, but not
transmitted to the
host.
Scanner is not
programmed for the
correct host type.
Scan the appropriate host type
bar code.
Problem Possible Causes Possible Solutions