ZEISS Start-Up and Operation Primovert
22 415510-7244-001 12/2014
Legend to Fig. 11:
1 Transmitted-light illuminator (built-in)
2 Filter slider
3 Slider with phase stops
4 Handle (rear)
5 Control knob for Y travel of specimen guide (travel readable on alphabetic scale reflected in the mirror)
6 Control knob for X travel of specimen guide (travel readable on numeric scale)
7 Specimen guide
8 Specimen stage
9 Fine focusing drive (right side)
10 Coarse focusing drive (right side)
11 Rotary knob for adjusting the illumination intensity
12 On/off switch for illumination; active with rotary knob in AUTO position
13 Tube
14 Binocular part of the tube
15 Eyepieces
16 Camera port (only stand with binocular phototube)
17 Lever for adjusting the aperture diaphragm of the condenser
18 Objective
19 Rotary knob for switching the microscope on and off, with ON, OFF and AUTO positions
20 Ring for adjusting the torque of the coarse focusing drive
21 Coarse focusing drive (left side)
22 Fine focusing drive (left side)
23 Nosepiece
24 Illumination intensity indicators (on both sides of the stand)
25 Plug-in power unit
To Next Page
Loading...
