ZEISS Start-Up and Operation Primovert
26 415510-7244-001 12/2014
Legend to Fig. 14:
1 Transmitted-light illuminator (built-in)
2 Filter slider
3 Slider with phase stops
4 Handle (rear)
5 Specimen stage
6 Rotary knob for adjusting the transmitted light illumination intensity
7 Fine focusing drive (right side)
8 Coarse focusing drive (right side)
9 On/off switch for illumination; active with rotary knob in AUTO position
10 Tube
11 Binocular part of the tube
12 Eyepieces with eyecups
13 Camera port (only stand with binocular phototube)
14 Lever for adjusting the aperture diaphragm of the condenser
15 Rotary knob for switching the microscope on and off, with ON, OFF and AUTO positions
16 Ring for adjusting the torque of the coarse focusing drive
17 Coarse focusing drive (left side)
18 Fine focusing drive (left side)
19 Rotary knob for adjusting the fluorescent illumination intensity
20 Nosepiece
21 Transmitted light / reflected light changeover switch (Brightfield / Fluorescence)
22 Plug-in power unit
To Next Page
Loading...
