EasyManua.ls Logo

ZENEC ZE-NC520 - Tools and Supplies; Disconnecting the Battery

ZENEC ZE-NC520
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
ENGLISH
DISCONNECTING THE BATTERY
To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery
cable prior to installation.
NOTE:
Use extra caution during installation to avoid causing a short circuit.
NOTE:
It is especially important that you read the WARNINGS and NOTES in this manual.
ADDITIONAL FEATURES
Integrated iPod interface (iPod control)
Integrated SD-card reader
Integrated Bluetooth module
Integrated 4 x 50 watts digital amplifier
Dual zone function (DVD)
White backlit key illumination
ISO connectors for power supply and speakers
2 x IR-remote controls
OPTIONAL ADD-ON POSSIBILITIES (TOUCHSCREEN COMPATIBLE)
DVB-T tuner ZE-DVBT25
WARNING!
1. Only connect the unit to a 12V negative ground system.
2. Never install this unit where operation and viewing could interfere with safe driving
conditions.
3. To reduce the risk of a traffic accident (except when using for rear view video camera)
never use the video display function while driving the vehicle. This is a violation of law.
4. To reduce the risk of a traffic accident, never driving with the sound at a level that
prevents you from hearing sounds outside around the vehicle.
5. Never disassemble or adjust the unit without the assistance of a professional. For
details, please consult your local car stereo specialty shop.
6. To prevent injury from shock or fire, never expose this unit to moisture or water.
7. Never use irregular discs.
8. To prevent damage to the mechanism inside this unit and avoid impact to the TFT
monitor.
9. Do not change the fuse on the power wire without professional guidance. Using an
improper fuse may cause damage to the unit and result in a fire.
10. The monitor employs an automatic motorized mechanism. To prevent damage to the
core mechanism, please do not push, pull or swivel the monitor manually.

Table of Contents

Related product manuals