95
ENGLISH
NOTE:
■ This product features a tuner with RDS function. RDS (Radio Data System) is a system
that transmits broadcast station information together with FM programs.
■ You get display of Program Service Name and PTY, tuning to stations broadcasting a
desired PTY, automatic tuning to traffic information, and emergency broadcasts and
radio text display.
■ RDS service is not available in AM broadcasting. RDS service availability depends on
the FM broadcasting provider.
SWITCH TO RADIO TUNER SOURCE
■ Press the SRC button on the remote control to switch to the Tuner source.
You can also access the tuner mode from the MAIN menu directly.
SELECT FM/AM BAND
■ Touch the
A
button on the screen, or press the BAND button [■/BAND] on the remote
control to change among the following bands: FM-1, FM-2, FM-3, AM-2.
AUTO TUNING
■ Press the
[:] button on the remote control or touch the f button on the screen to seek
the next available channel by increasing the tuning frequency. Press the button again to
stop searching.
■ Press the [9] button on the remote control or touch the g button on the screen to seek
the next available channel by decreasing the tuning frequency. Press the button again to
stop searching.
MANUAL TUNING
■ Touch the
D or C button to increase or decrease the tuning frequency one step.
USING PRESET STATIONS
■ 6 numbered preset buttons store and recall stations for each band. 6 stored stations
(P01-P06) for the current band appear on the screen, touch the channel directly to
select.
You can touch the arrow
buttons on the screen to select other stations.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an on-screen preset button (6) for three seconds. The preset number
appears at the top of the screen.
19.
h
Touch to activate/deactivate MONO function.
0 20. Current radio band indicator.
0 21. Radio frequency indicator.
0 22. User defined equalizer mode.
0 23. Loud setting indicator.
24. Rear Setting.
0 25. Volume indicator.
To Next Page
Loading...
