INSTALLATION I PAGE 13
Before you can record programs with VCRPLus+®, you must teU this VCRthe PLusCodeTM channeLsfor your area.
Introduction
These PtusCodeTM channels must be mapped to the active
channels you found using AUTOPROGRAMon the SETUP
menu. An example of channel mapping and a blank
worksheet are provided for your convenience. Checkthe TV
schedule in your Local newspaper for the published
PtusCode"channels.
Note: The VCRPLUS+system does not control the cable
box.
Channel Mapping Your VCR
PREPAHAT]ON(A|ready Done)
See "Before You Operate YourVCR"section.
1. Set Date and Time for CLock.
2. SeLectTuning Band for VCR.
3. Use Auto Channel to find channels.
PRELIHENARYSTEPS
1. Turn on VCR,W, and cable box (if used).
2. Select TV (or CAW) for SOURCEon SETUPmenu.
3. Obtain [isling of PLusCodechannels.
CHANNEL MAPPENG
1. CompLete Channel Mapping Worksheet.
2. PressVCR+on remote and follow aLLon-screen
instructions. Enterchannels with Numbers. Use AD3
(Left/Right) to erase (some models).
Example of Completed Worksheet
Worksheet with Channels Found
via Auto Channel
Channelfound Published
Networkor PlusCodeTM
viaAutoChannel
StationID Channel
(TVCh/CableCh)
(VCR+Ch)
2 CBS
5 NBC
7 ABC
9 WB
11 PBS
20 PBS
23 WFBT
WSNS
50 WPWR
60 HSN
66 WGBO
Completed Worksheet for Channel Mapping
Channelfound Pul_isedd
viaAutoChannelNutwed¢or PlusCodeTM
03/Ch/CabteCh) StationI0 Channel
(VCR+Ch)
• 2 CBS 2
5 NBC 5
7 ABC 6
9 WB 8
I1 PBS 11&19
20 • PBS 20
23 WFBT -- €.J
26
WSNS 4
50 WPWR 42
60 HSN - -
66 WGBO 46
Published List of PlusCodo"
Channels
PlusCodes
Ch,2:WBBM (CBS)
Ch.5:WMAQ (NBC) 2
Ch.7:WLS (ABC)
Ch,9:WGN 0NB) 6
Ch.11:W]TW (PBS) 11 &tg
Ch.20:WYCC (PBS) 20
Ch.26:WCIU (Ind.) 26
Ch.32:WFLD (Fox) 32
Oh.38:WCFC (ind.)
Ch.44:WSNS (Tel,) 43
Ch.50:WPWR (UPN) 42
Ch.66:WGBO (UnL) 46
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plus+system is manufactured under
license from GemstarDevelopment Corporation.
To Next Page
Loading...
