Page 18 of 28 801314 v3.05 09.20 HT BC Commercial Instructions
Installation Instructions
: Not required for standard BC HydroTap models.
394mm
RED
CLEAR
BLUE
BRAIDED
Min.
70mm
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT
BYPASS
OUT
5.3 Models BC 160/125 and BC 160/175
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the
Command Centre
close to the outlet
tap, within reach of
the hose and cord
lengths supplied
Note:Note: the hoses the hoses
need to have a need to have a
constant downward constant downward
gradient to the Hy-gradient to the Hy-
droTap to allow all droTap to allow all
water to drain back water to drain back
into the tanks.into the tanks.
NOTE:
The tube lengths are matched to the pump performance and therefore CANNOT be lengthened
Min.
50mm
Max.
1000mm
To Next Page
Loading...
