Zip HydroTap G4 - Model 4-In-1 Vented

Page 22 of 28 801314 v3.05 09.20 HT BC Commercial Instructions
Installation Instructions
5.7 Model 4-In-1 Vented
HydroTap
Mixer
Connections
RED
CLEAR
BLUE
BRAIDED
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT
BYPASS
OUT
NOTE: The tube lengths are matched to the pump performance and therefore CANNOT be lengthened
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the
Command Centre
close to the outlet
tap, within reach of
the hose and cord
lengths supplied
Note:Note: the hoses the hoses
need to have a need to have a
constant downward constant downward
gradient to the Hy-gradient to the Hy-
droTap to allow all droTap to allow all
water to drain back water to drain back
into the tanks.into the tanks.
Tee piece and Flow
Restrictor (supplied),
to Mixer
External COLD
isolation valve
(not supplied)