801314 v3.05 09.20 HT BC Commercial Instructions Page 5 of 28
Thank you for purchasing a Zip HydroTap. Please read and follow these instructions carefully to ensure safe
and trouble free service. For enquiries and service, please contact your Zip service provider.
What is the Zip HydroTap ?
The Zip HydroTaps are electronically controlled, filtered, boiling water and chilled water drinking systems for
kitchens and tea rooms. The HydroTap Command Centre is an under-bench drinking water appliance with a
dispensing tap mounted on a sink or bench, which may be used for residential or commercial applications.
These units utilise a conventional refrigerant compressor to chill the water and an immersion heating element
to boil the water. These units dispense boiling water (factory set to 98°C) and chilled water (factory set to
5-9°C). These units are NOT designed to be used for sanitary fixtures.
The Boiling water Command Centres are fitted with a tap mounted, safety lock. In addition, there are
various energy saving options accessible via the main menu. Each Command Centre is equipped with a
self-calibrating program which caters for altitude adjustment. The water filter is a disposable item which will
require periodic replacement and is covered by a limited OEM warranty.
It is important that the Installation be done safely, correctly and completely, in order to utilise all the benefits
the HydroTap can provide. Classic and All-In-One taps may be ordered with the Tap Head Assembly for
Disabled use. The disabled levers are supplied with Braille caps for the visually impaired.
General Product Features
HydroTap Classic
BC160/125
To Next Page
Loading...
