Page 20 of 28 801314 v3.05 09.20 HT BC Commercial Instructions
Installation Instructions
Booster
RED
CLEAR
BLUE
BRAIDED
5.5 Model All-In-One Mains Pressure
Booster
option
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT
BYPASS
OUT
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the
Command Centre
close to the outlet
tap, within reach of
the hose and cord
lengths supplied
Note:Note: the hoses the hoses
need to have a need to have a
constant downward constant downward
gradient to the Hy-gradient to the Hy-
droTap to allow all droTap to allow all
water to drain back water to drain back
into the tanks.into the tanks.
: Not required for standard BC HydroTap models.
NOTE: The tube lengths are matched to the pump performance and therefore CANNOT be lengthened
NOTE: to activate the filter, flush at least 10L of water through the filter before connecting to a softener or to
a Booster heater.
Tee piece
(Supplied)
External HOT and
COLD isolation valves
(not supplied)
To Next Page
Loading...
