ZKTeco iFace Series User Manual

iFace Series Installation Guide
8
3 Installation
3.1. Installation Steps
1. Affix the paper template to the wall and drill holes within the
three marked circles on the paper template.
We recommend affixing the template about four (4) feet (1.2m)
above the ground, assuming the average height of your users is
5-6 feet tall(1.5m-1.85m).
2.Now affix the mounting plate on the wall by drilling three (3)
screws into the three (3) circles marked on the paper template.
3. After installing the back cover, ensure it will be stable, solid and
non-loosening.

ZKTeco iFace Series Specifications

General

Fingerprint Capacity	500-3000
Log Capacity	100000
Communication	TCP/IP, USB
Operating Temperature	0 °C- 45 °C
Operating Humidity	20%-80%
Verification Speed	<1 second
Weight	Varies by model
Face Capacity	700 (Up to 3, 000)