iFace Series Installation Guide
1
1 System Configuration
1.1. Notice about installing
This product a mass-produced product. It strictly follows to the
criteria of manufacture and inspection of China, U.S.A, and EU.
This file contains important information. It is better for you to read
it carefully prior to use. If you ignore it, the incorrect installation
may cause the unit damage. Although we could do our best to
offer you service, the neglect to the file could cause unwanted cost
for you.
1. Before installation, please make sure the power is cut off,
because it is very dangerous if the power is on. The
short-circuit of power cable may cause the core parts damage.
2. All exposed part of connection wire end can not be exceeded
5mm to prevent the bared wire accidental connection which
leads to machine break down. And also suggest using different
colour cable to connect.
3. In the place where the static is strong or in winter, please
connect the grounding firstly, in order to prevent the instant
mass static damage the machine.
4. Connect power supply with device in the last for the wiring
connection. If you find any unusual thing occur, please firstly
cut off the power, then go to examine. Keep in mind: wiring
operation under power on will lead to machine sudden damage;
we are not liable for damages and trouble due to such
To Next Page
Loading...
Need help?
General
