ZKTeco iFace Series User Manual

iFace Series Installation Guide
21
3.2.9 Power Connection
The device’s working voltage is DC12V,，with working current
500mA, standby current 50mA has provided two ways to connect
power, please select one referring to the actual.
1．Terminal connection, Make sure the connection as the
Diagram (Don’t connect the poles in reverse.).
2．Slot connection: Insert the plug of DC12V adapter into the
power slot directly.
Power Slot
DC 12V
Terminal connection
Slot connection

ZKTeco iFace Series Specifications

General

Fingerprint Capacity	500-3000
Log Capacity	100000
Communication	TCP/IP, USB
Operating Temperature	0 °C- 45 °C
Operating Humidity	20%-80%
Verification Speed	<1 second
Weight	Varies by model
Face Capacity	700 (Up to 3, 000)