ZKTeco iFace Series User Manual

iFace Series Installation Guide
27
Technical parameter：
Charge time Less than 4 H Discharge
time
More then 5.5 H
Working
environment
0℃～50℃
Relative
humidity
10％～90％
Storing
environment
Please store the battery when the discharge
capacity is full.,and the environment is 20℃±5℃。
Cycle age Cycle times of charge and discharge≥300 times
Notice：
There is a danger of battery exploding, leak, fever, fire, break, if
you don’t read the notice carefully.
Do Not use it over 50℃；
Do Not inverse polarity connection；
Do Not put the battery into water or let it to get wet；
Do Not use and store battery near heat-generating
machine ( such as fire or heater)；
Battery slot
Power key

ZKTeco iFace Series Specifications

General

Fingerprint Capacity	500-3000
Log Capacity	100000
Communication	TCP/IP, USB
Operating Temperature	0 °C- 45 °C
Operating Humidity	20%-80%
Verification Speed	<1 second
Weight	Varies by model
Face Capacity	700 (Up to 3, 000)