SpeedFace-V3L(Lite) User Manual
P a g e
|
27 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
6.1.3Face
Tap
Face
in the
New User
interface to enter the face registration page.
Please face towards the camera and place yourself in such a way that your face
image fits inside the white guiding box and stays still during face registration.
A progress bar shows up while registering the face and then "Enrolled Successfully"
message is displayed as the progress bar completes.
If the face is registered already then, the "Duplicated Face" message shows up.
The registration interface is as follows:
6.1.4Card
Tap Card in the New User interface to enter the card registration page.
Swipe the card underneath the card reading area on the Card interface. The
registration of the card will be successful.
If the card has already been registered, the message "
Error! Card already
enrolled" appears. The registration interface looks like this: