ZKTeco SpeedFace-V3L (Lite) User Manual

SpeedFace-V3L(Lite) User Manual
P a g e
|
60 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
12 Access Control
On the Main Menu, tap Access Control to set the schedule of the door opening,
locks control and to configure other parameters settings related to access control.
To gain access, the registered user must meet the following conditions:
1. The relevant door’s current unlock time should be within any valid time zone
of the user’s time period.
2. The corresponding user’s group must be already set in the door unlock
combination (and if there are other groups, being set in the same access
combo, then the verification of those group’s members is also required to
unlock the door).
3. In default settings, new users are allocated into the first group with the default
group time zone, where the access combo is "1" and is set in unlock state by
default.
12.1 Access Control Options
Tap Access Control Options on the Access Control interface to set the parameters of
the control lock of the terminal and related equipment.

ZKTeco SpeedFace-V3L (Lite) Specifications

General

Brand	ZKTeco
Model	SpeedFace-V3L (Lite)
Category	Intercom System
Language	English