ZKTeco SpeedFace-V3L (Lite) User Manual

SpeedFace-V3L(Lite) User Manual
P a g e
|
50 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name
Description
QR Code Binding
After downloading and installing the ZSmart APP on
the phone. Open it and scan the QR code to add the
device for the video door phone connection.
Intercom Server
Setting
Set the IP address and port number of the intercom
server.
Server Address: Enter the sever installation IP
address.
Server Port:
It is the service port set during
installation (not the ADMS port).
Calling Timeout (s)
If the call is not answered within a specified time, it
exits to the main interface.
9.5Device Type Settings
Click
Device Type Settings
on the
System
interface.
Function Description
Function Name
Description
Communication
Protocol
Set the communication protocol to PUSH protocol.
Device Type
Set the device as T&A PUSH or A&C PUSH.

ZKTeco SpeedFace-V3L (Lite) Specifications

General

Brand	ZKTeco
Model	SpeedFace-V3L (Lite)
Category	Intercom System
Language	English