ZKTeco SpeedFace-V3L (Lite) User Manual

SpeedFace-V3L(Lite) User Manual
P a g e
|
52 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Display
Verification Name
Set whether to display the username in the verification
result interface.
Display
Verification Mode
Set whether to display the verification mode in the
verification result interface.
9.7
Factory Reset
The Factory Reset function restores the device settings such as communication
settings and system settings, to the default factory settings (this function does not
clear registered user data).
Tap Reset on the System interface and then tap OK to restore the default factory
settings.

ZKTeco SpeedFace-V3L (Lite) Specifications

General

Brand	ZKTeco
Model	SpeedFace-V3L (Lite)
Category	Intercom System
Language	English