ZKTeco SpeedFace-V3L (Lite) User Manual

SpeedFace-V3L(Lite) User Manual
P a g e
|
48 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Face Rotation Angle
It is the rotation angle tolerance of a face for facial
template registration and comparison.
If a face’s rotation angle exceeds the set value, it will
be filtered by the algorithm, i.e., ignored by the terminal
thus no registration and comparison interface will be
triggered.
Image Quality
It is the image quality for facial registration and comparison.
The higher the value, the clearer image is required.
Minimum Face Size
It sets the minimum face size required for facial
registration and comparison.
If the minimum size of the captured image is smaller
than the set value, then it will be filtered off and not
recognized as a face.
This value can also be interpreted as the face comparison
distance. The farther the individual is, the smaller the
face, and the smaller number of pixels of theface obtained
bythe algorithm.Therefore,adjusting this parameter can
adjust the farthest comparison distance of faces. When
the value is 0, thefacecomparison distance isnot limited.
LED Light Trigger
Threshold
This value controls the turning on and off of the LED
light. The larger the value, the LED light will turn on or
off more frequently.
Motion Detection
Sensitivity
It sets the value for the amount of change in a camera’s
field of view known as potential motion detection
that wakes up the terminal from standby to the
comparison interface.
The larger the value, the more sensitive the system
would be, i.e., if a larger value is set, the comparison
interface activates with much ease, and the motion
detection is frequently triggered.

ZKTeco SpeedFace-V3L (Lite) Specifications

General

Brand	ZKTeco
Model	SpeedFace-V3L (Lite)
Category	Intercom System
Language	English