To Next PageTo Next PageWhat should I do if my Zodiac Vortex 3.2 shows error codes 1 and 4?
If your Zodiac Swimming Pool Vacuum displays error codes 1 and 4, inspect the fan for pebbles or hair and clean the filter.
Key information for safe operation, avoiding harm to persons or appliance damage.
Specifies the cleaner's intended purpose for pool water cleaning only.
Details potential wear and tear on vinyl pool surfaces from the cleaner.
Instructions for checking appliance for transport damage before initial use.
Lists key technical data such as power, dimensions, weight, and flow rate.
Provides guidelines for optimal cleaner performance and pool water conditions.
Details items included in the package and instructions for assembling the transport caddy.
Step-by-step guide on how to safely place the cleaner into the pool water.
Instructions for connecting the control box to the power supply safely and correctly.
Overview of the control box features and indicators for the Vortex™ 3.2 model.
Details the control box features and indicators specific to the Vortex™ 3 4WD model.
Explains the control box features and indicators for the Vortex™ 4 4WD model.
Guide on how to initiate a cleaning cycle using the control box.
How to choose and customize different cleaning modes and patterns.
Procedures for safely retrieving the cleaner from the pool using its modes.
Instructions on how to properly stop the cleaner and put the control box in standby.
Step-by-step guide to set the current time and day on the control box.
How to quickly view the current time and day setting.
Detailed instructions on scheduling multiple cleaning cycles for future use.
How to check the days and times of pre-programmed cleaning cycles.
Guide on operating the cleaner using the remote control unit.
Steps to pair the remote control with the control box if they are changed or not communicating.
Instructions on how to clean the filter for optimal cleaner performance.
Guide on how to replace worn brushes on the cleaner.
Instructions for changing the bands on the cleaner.
Advice on regular cleaning and storage of the cleaner.
Guidance on the proper disposal and recycling of the appliance.
Explains control box error codes and their potential causes for the Vortex™ 3.2 model.
Explains control box error codes and their potential causes for Vortex™ 3 4WD and 4 4WD models.
Addresses common operational problems and their solutions not covered by error codes.
Accessing a diagnostic menu to get information for troubleshooting malfunctions.
Lists the directives and standards the appliance complies with.
General| Type | Robotic |
|---|---|
| Pool Type | In-ground |
| Drive System | 4-wheel drive |
| Compatibility | All pool surfaces |
| Warranty | 2 years |
| Cleaning Cycle Time | 2.5 hours |
