ZOLL PD 2000 - Page 15

CHECKOUT PROCEDURES
SIX-MONTH CHECKOUT PROCEDURE
This section of the PD™ 1400-series Service Manual contains a series of
checkout procedures to be performed by technical personnel on a routine
basis (recommended for six-month intervals) to ensure quality operation
of the PD™ 1400-series devices. Some tests require specialized testing
equipment and trained personnel. Each test sequence lists the tools
required and the frequency with which the test should be performed.
ZOLL recommends that a routine testing procedure be established for
your ZOLL PD™ 1400-series equipment based on the forms supplied in
this section.
TESTING NOTES
e Be sure to complete all actions for a Step before looking
for results.
« Fill in the Value column on the Checkout Procedure Data
Sheet with a check mark ( v ) if the correct result (shown
in the Look for column) is achieved or with a specific
value where a test reading has been made.
For troubleshooting information, refer to Section III in this manual.
Recommended Six-Month Checkout Procedure
Initialize Test
Leakage Test
Diagnostics Mode Tests
Power Supply Test
CS AAA
Pacer Tests
Defibrillator Tests
MEE Tests.
Real Time Clock Check
는
© ©
no
mom