ZOLL PD 2000 - Page 9

GENERAL INFORMATION
Section III: Troubleshooting Guides
This section contains an operational troubleshooting section, one for use
by non-technical personnel to respond to common problems detected
during PD™ 1400-series operational use.
Section IV: Functional Descriptions
This section provides a basic technical description of each of the
PD™ 1400-series's main subassembly modules. The information should
be thoroughly reviewed before servicing.
Section V: Schematic Drawings
Major circuit board schematics are included for troubleshooting
purposes. ]
Section VI: Component Layout Drawings
Major component layout drawings are included for troubleshooting
purposes,
Section VII: Disassembly Procedures
Step-by-step instructions are provided-for removing subassemblies in the
event of failure.
Refer to the Service Policy in Section I for return and repair information.
Section VIH: Replacement Parts
This
section contains a detailed listing of ZOLL part numbers for field
replaceable parts available for the PD™ 1400-series. It will allow the
service person to identify and order replacement parts. No attempt to
replace parts at the component level should be attempted or the ZOLL
warranty may be voided.
Appendix A: Operation `
The Operator’s Manual has been reproduced here for convenience and
consistency. It should be read and understood before attempting any
service procedure
1-7