Zoom 8080 - Page 30

29
■
Advanced Operation
Use 4 to
set the CSW
parameter to "Tap".
Data entry knob
6
If desired, store the
patch.
In Play mode, if a patch for which
tap input is possible is selected, the
panel indicators flash as follows.
("Storing an edited patch"
p. 23).
7
While playing your
instrument, tap the
DECREASE
twice in the
desired tempo.
The 8080 detects the interval
between taps of the switch and sets
the delay time accordingly.
CONTROL switches
8
DLY HiD= 0 SEL=MN
é RTM=Mix CSW=Tap
If the tapping interval is more than 4 seconds, the CONTROL SWITCH INDICATOR flashes more rapidly and the delay
time will not be set. In this case, press the DECREASE CONTROL switch once more to start the tap input again.
NO
✎
DECREASE DECREASE
TIME
delay time
DECREASE
–(TAP/HOLD)
TAP/HOLD LED
R
flashing in current
delay time interval
1/2
MIN
BLINK
(DLY:TAP)
CONTROL SWITCH INDICATOR
d
flashing in
1-second intervals