Zoom 8080 - Page 44

43
■
Advanced Operation
Use the to
select one of the four
combinations shown
below.
Display Ring Tip
R(s) T(s) Short Short
R(o) T(o) Open Open
R(o) T(s) Open Short
R(s) T(o) Short Open
TYPE -/+ keys
5
Store the patch as
required.
("Storing an edited patch"
p. 23).
When this patch is selected,
channel selection or effect on/off
switching can be performed for the
external amplifier.
6
Foot switch specifications may differ for various amplifiers. Normally, the same cable as used for the foot switch supplied
with the amplifier (mono or stereo) should be used. For details, please refer to the manual of the amplifier. Be sure to turn
the equipment off before making any connections.
Some amplifiers may not be suitable for control from the 8080, even if a foot switch jack is provided.
HINTHINT
NO
✎