2. Use and to show the icon for the desired setting item.
See the reference links for details about each setting.
Change the effect order.
(→Changing the order of effects)
Change the patch memory name.
(→Changing patch memory names)
Save and copy patch memories.
(→Copying and saving patch
memories)
Delete patch memories. (→Deleting
patch memories)
Turn the pre-selection function
on/off. (→Using the PRESELECT
function)
Turn the automatic saving function
on/off. (→Setting the AUTO SAVE
function)
Restore factory default settings.
(→Restoring factory default
settings)
Turn the ECO mode on/off.
(→Setting the ECO mode)
Check the firmware versions.
(→Checking the firmware versions)
Adjust the display contrast.
(→Adjusting the display contrast)
3. Press a – footswitch that corresponds to an icon.
This opens the selected settings screen.
For example, press when AUTO SAVE is selected.
16
To Next Page
Loading...
