Zoom B2FOUR - Using the Bypass Function

Using the bypass function
All B2 FOUR effects and the DI MODEL can be bypassed. Bypassing only the effects section is also possible.
1. Press .
This bypasses the effects section and the DI MODEL.
2. Press and hold .
This bypasses the effects section.

ALL BYPASS This bypasses the effects section and the DI MODEL.
EFX BYPASS This bypasses the effects section.
(Only the DI MODEL is
used.）
Unlit This bypasses nothing.
HINT:
• Adjusting the EQ and volume of a bass amp, for example, is easier if the B2 FOUR effects are bypassed.
• The bypass function will be off when the power is turned on.
22