Zoom B2FOUR - Turning the Power On and Off

Turning the power on/off
Turning the power on
1. Minimize the volume of the amp or powered monitors.
NOTE:
To prevent noise and malfunction, connect powered monitors and bass amps before turning the power on.
2. Set to ON.
This turns on the B2 FOUR and opens the MEMORY Screen.
3. Raise the volume of the amp or powered monitors.
ECO mode overview:
• By default, ECO mode is set to ON, so the power will automatically turn off if no use occurs for 10 hours.
• ECO mode can also be turned OFF. (→Setting the ECO mode)
Turning the power off
1. Minimize the volume of the amp or powered monitors.
2. Set to OFF.
The display will turn off.
20