Zoom B2FOUR - Using the Looper; Setting the Looper Effect

Using the looper while playing
Playing can be recorded to create mono loop phrases that are up to 60 seconds long.
Setting the looper effect
Various looper settings can be made.
On the B2 FOUR, one looper can be used as an effect, and it can be started and stopped by turning the
effect on/off.
Select the looper effect on the EFFECT Screen to make various looper settings, including loop recording
time and volume.
Each patch memory can have only one looper effect set.
1. Open the EFFECT Screen for the patch memory that will have the looper effect set (→Opening the
EFFECT Screen).
2. Use and to select the effect to use for the looper effect.
62