Zoom B2FOUR - Using Rhythms; Setting the Rhythm Effect

Using rhythms
You can play along with built-in rhythms.
Setting the rhythm effect
On the B2 FOUR, one rhythm can be used as an effect, and it can be started and stopped by turning the
effect on/off.
Select the rhythm effect on the EFFECT Screen to make various rhythms settings, including rhythm pattern
selection and tempo.
Each patch memory can have only one rhythm effect set.
1. Open the EFFECT Screen for the patch memory with the rhythm effect to be set (→Opening the
EFFECT Screen).
2. Use and to select the effect to use for the rhythm effect.
3. Press / to open the Library Screen, and use , , and to select a
rhythm effect.
The rhythm effect is in the column second from the right on the Library Screen.
58