Looper operations
Looper recording, playback and other operations can be conducted when the looper effect is shown on the
EFFECT Screen.
HINT:
• Looper recording/playback will continue even if is pressed to switch to the MEMORY
Screen. In this case, changing patch memories will stop recording/playback and erase the recorded data.
• Pressing / to open the Library Screen will stop recording/playback.
Recording loops
1. When a loop has not yet been recorded, press the – footswitch that corresponds to the
looper effect ( in this example).
Recording will start and the indicator will light.
Press the footswitch with the lit indicator 2 times to cancel recording.
69
To Next Page
Loading...
