Zoom B2FOUR User Manual

Stopping recording and starting loop playback
1. When recording, press the – footswitch that corresponds to the looper effect ( in this
example).
Recording will stop and loop playback will start.
NOTE:
• If the maximum recording time is reached, recording will stop and loop playback will start.
• If the recording time is set to “♩×1–64”, recording will stop and loop playback will start after the set
recording time has elapsed. (→Setting the recording time)
Stopping playback
1. During playback, press the – footswitch that corresponds to the looper effect ( in this
example) 2 times.
The indicator becomes unlit when playback stops.
70

Zoom B2FOUR Specifications

General

Type	Bass Multi-Effects Processor
Simultaneous Effects	5
MIDI I/O	No
USB	1 x USB-C
Looper	Yes
Inputs	1 x 1/4" (instrument)
Outputs	1 x 1/4" (main out)
Power Source	4 x AA batteries
Headphones	1 x 1/8"