Selecting the DI MODEL
The DI MODEL section of the B2 FOUR has 6 selectable types that reproduce the characteristics of vacuum
tube and solid-state DIs.
The DI MODEL affects the output of the BALANCED OUTPUT, OUTPUT and PHONES jacks.
1. Press to select the DI MODEL.
TUBE 1 This models the characteristics of a vacuum tube DI with rich harmonics
and thick low frequencies.
TUBE 2 This models the characteristics of a vacuum tube DI with a clear attack and
tight low frequencies.
TUBE 3 This models the characteristics of a vacuum tube DI with a clear beautiful
sound.
SOLID STATE 1 This models the characteristics of a solid-state DI with moderate
compression and a sharp tone.
SOLID STATE 2 This models the characteristics of a solid-state DI with a clear tone and
little distortion.
SOLID STATE 3 This models the characteristics of a solid-state DI evocative of the Motown
sound.
OFF This turns off the DI MODEL.
21
To Next Page
Loading...
