Zoom B2FOUR User Manual

Reverting patch memory changes
After changing a patch memory, it can be reset to the state it was in immediately after it was selected or to
the factory default state.
1. Press and hold footswitch .
This opens the Revert Screen.
2. Use and to select the desired state.
Setting Explanation
PREVIOUS This reverts the patch memory to its state immediately after
selection.
FACTORY This reverts the patch memory to its factory default state.
50

Zoom B2FOUR Specifications

General

Type	Bass Multi-Effects Processor
Simultaneous Effects	5
MIDI I/O	No
USB	1 x USB-C
Looper	Yes
Inputs	1 x 1/4" (instrument)
Outputs	1 x 1/4" (main out)
Power Source	4 x AA batteries
Headphones	1 x 1/8"