3. Press / to open the Library Screen, and use , , and to select the
looper effect.
The looper effects are in the second column from the right on the Library Screen. Choose either the
MONO LOOPER or the STEREO LOOPER.
NOTE:
• The recording time for the mono looper is from 1.5 to 60 seconds (30 seconds when UNDO is ON).
• The recording time for the stereo looper is from 1.5 to 30 seconds (15 seconds when UNDO is ON).
4. Press .
This opens the EFFECT Screen.
63
To Next Page
Loading...
