5. Turn to adjust the looper effect settings.
See the reference links for details about the settings.
❶
Loop recording time
This sets the recording time for the loop. (→Setting the recording time)
❷
Undo function setting
This turns on/off the undo function that can be used to undo the last recorded overdub of a loop.
(→Setting the UNDO function)
❸
Stop mode
This sets how the looper behaves when loop playback is stopped. (→Setting the stop mode)
❹
Volume
This adjusts the looper volume. (→Adjusting the volume)
64
To Next Page
Loading...
